Product Firmware

This is the 5GXtream firmware and is only applicable for units sold in Europe, Australasia, South America, etc. (ROW model). This update MUST NOT be used with the model sold in North America and Canada (US model). This update is a major stable release and we recommend this update to all of our customers to bring them up to the latest kernel and libraries.  DO NOT FORGET to unzip the binary file inside before uploading to your 5GXtream.

This is the latest firmware for our 4GConnect and 4GConnect Pro products and is common across all variants. This update includes the changes to support the AT&T network, which turned off 3G support in Q1/2022. We also recommend this update to all of our customers to bring them up to the latest kernel and libraries. DO NOT FORGET to unzip the binary file inside before uploading it, using the 4GConnect web interface. This update features a new web interface, and so we have published a new 4GConnect User Manual V2.00 which you can download from the "Manuals" area.

This is the latest firmware for our 4GXtream products and is common across all variants. This update is a major stable release and we recommend this update to all of our customers to bring them up to the latest kernel and libraries. DO NOT FORGET to unzip the binary file inside before uploading it, using the 4GXtream web interface.

Windows program (V2.8.0) to Update the firmware in our STM32 based products; iKonvert, ST-NMEA Converter and GPS160. Unzip the downloaded file and run the EXE installer file.

Latest Transponder Firmware Update for AIT1500/2000/3000/Nomad (Windows Only)

Latest firmware for our new WLN10SM Smart Wireless NMEA Server (not suitable for WLN10 or WLN10HS units). Update the firmware via the WLN10SM web interface and once successfully updated, press and hold the reset switch for >10 seconds to restore to factory defaults.

This was the last firmware update for our 4GConnect products that featured the original web interface and is common across all variants. This is an important update for any users that wish to upgrade to the new user interface or for US customers that are using the AT&T network and wish to update to the latest firmware version 07.01.02 that is needed now that AT&T have turned off their 3G service. DO NOT FORGET to unzip the binary file inside before uploading it, using the 4GConnect web interface. IMPORTANT NOTE - if your 4GConnect has an earlier version of firmware and you wish to upgrade to the new web interface, you must update to this version first and then update to version 07.01.02

This is the latest version of our WL510 firmware. Do not update your unit unless expressly told to by Digital Yacht, as some older units will not work with this latest firmware or will need to be fully re-configured.

iKommunicate SD Card image including 21st April 2017 Firmware Update

Latest iKommunicate firmware update (21st April 2017)

Final firmware update for our legacy Transponders AIT250 + AIT1000

Latest Receiver Firmware Update for AISNode and AISNet (units sold since Sept 2015)