Advanced iSeaSense Pack

In terms of instruments, the WND100 is an ultra tough wind transducer with Iglidur™ bearings for exceptional life and corrosion resistance. Data transmission is via a super-thin 20m digital cable, where wiring connects it to an NMEA2000/NMEA0183 converter allowing you to connect direct to the NMEA 2000 network.

The Smart Sensor is a depth, speed, temperature and altitude sensor with NMEA 2000. It also has a built in attitude sensor for vessel heel and trim measurements and a fast 5Hz update of boat speed, ideal for speed trimming and superior accuracy.  Trim and heel data is updated at 10Hz. Moreover, this is the market’s first Retractable multi- sensor offering depth, speed, altitude and temperature in a single, 51 mm (2”) fitting. It also features a Bluetooth interface which is used for transducer calibration.

The HSC100 is an accurate fluxgate compass heading data. This remains a fundamental parameter for marine navigation and the HSC100 uses fluxgate technology to deliver heading data for on board systems.

For a full instrument and weather monitoring solution, this pack includes our new NMEA 2000 barometer and marine weather station EnviroLink. EnviroLink is a smart NMEA 2000 environmental sensor integrating high-precision barometric, temperature and humidity sensors. It broadcasts this data instantly to your MFD and chartplotters connected to the NMEA 2000 network. Thanks to its integrated built-in web interface, all measurements and trends can be also viewed in real time from a smartphone or tablet to know how pressure, temperature and humidity evolve over time.

Also included on the pack is Bilge IQ, our new is a smart bilge pump monitor that transforms a standard bilge pump into a fully connected, intelligent safety system. Thanks to its NMEA 2000 integration and built-in Wi-Fi, Bilge iQ allows boat owners to monitor, control and analyse their bilge pump performance in real time from the chartplotter but also from phones, tablets & PCs.

The AIT2500 is an ultra-compact Class B+ SOTDMA AIS Transponder with NMEA 0183, NMEA 2000 and USB connection. The AIT2500 is supplied with GPS and VHF antenna (20m cable). The VHF antenna is a 15cm VHF heliflex antenna, this is specifically tuned to AIS (162MHz) frequencies for optimal performance.

Finally, the Advanced iSeaSense pack includes iSeaSense Wi-Fi interface. It is an easy to fit NMEA 2000 to WiFi server, with a design to allow NMEA 2000 navigation data available for apps on smartphones, tablets, iPads and PCs. Once installed, it creates a local WiFi network for devices to connect.

iSeaSense features an easy-to-use web interface.  No apps are required. Simply open the browser on a connected device, navigate to iSeaSense.local and the optimised touch screen display is ready. You can calibrate the wind sensor via the iSeaSense web interface and also displays true and apparent wind speed and angle plus VMG calculations.

The web interface works on iOS, Android, PC, Linux and MAC – any standard web browser as well as e-ink displays like Kindle and e-book. It supports up to 3 connected devices with super fast 5Hz updates. The data can also be used by 100’s of popular navigation apps & software such as Navionics, TZ iBoat, OpenCPN, SailGrib, etc.